Technologies
Technologies
To meet the changing demands of customers, cgcooler using a wide range of technologies to meet the thermal management needs of all industries. we have more than ten years experience in air cooling, liquid cooling and heat pipe mould cooling, so we can provice the thermal design, testing, and fabricating cooling solutions for the most demanding and high end products. cgcooler has such a high level of expertise, so cgcooler is qualified to help you select the right technology for your industril.
Each cooling technology can be used as either passive or active cooling solutions depending upon products and customers’ requirements. Learn more about each of the technologies of cgcooler below, or contact cgcooler for help you selecting the best technology for your thermal solution.
Thermal Management Technology Provider – Air Cooling, Liquid Cooling & Heat Pipe Cooling Solutions
Forced Air Cooling
Forced air cooling is a way to realize the cooling of heat source parts by increasing the flow of air. It is usually to speed up the flow rate of air through the object per unit time.
liquid cooling
Liquid cooling plate is through the structure of compact and relatively thin plate-like, strip metal internal layout of the fluid channel, so that the fluid and water cooling plate between the convection heat transfer.
Heat pipe cooling
The heat pipe heat sink is composed of sealing tube, suction core and steam channel.The suction core is surrounded on the wall of the sealed tube and impregnated with saturated volatile liquid.
Natural convection cooling
The heat source in the natural environment, heat is released into the air by convection and radiation.
